Corteva Access Herbicide Tricolpyr Picloram Liquid Hydrocarbon

Specialised product for robust control of almost any woody weed via the cut stump or basal bark application technique. Access offers a solution for very targeted woody weed control in environmentally sensitive situations.

240 g/L Triclopyr
120 g/L Picloram

Application Method is Basal bark, Thinline applications and cut stump.

GENERAL RATE ----------

1-4L/60L of Diesel*

* Biosafe may be used as an alternative carrier to diesel. For alternative biodiesel products, first seek advice from
Corteva Agriscience

Registered for control of a range of weeds
including:
- Acacia spp.
- African boxthorn
- Algaroba
- Angophora spp.
- Australian blackthorn
- Bitterbark
- Brush box
- Cacti
- Cockspur thorn
- Corkwood wattle
- Corymbia spp.
- Ellangowan poison bush
- Eucalyptus spp. Regrowth
- False sandalwood
- Green cestrum
- Grevillea spp.
- Groundsel bush
- Guava
- Hard milkwood
- Hawthorn
- Heartleaf poison bush
- Honey locust
- Kiteleaf poison
- Leucaena
- Limebush
- Lantana
- Narrow leaf hop bush
- Needlewood
- Oleander
- Parkinsonia
- Punty bush
- Red ash (white myrtle)
- Rubbervine
- Swamp box
- Sweet briar
- Tea trees
- Turpentine
- Turpentine bush
- Whitewood
- Wild orange
- Wild peach
- Wild Rosemary
- Wild tobacco
- Wilga
- Yellow bells (Tecoma spp.).

Please refer to the label for additional controlled weeds.


RESISTANT WEEDS WARNING ----------

Access® Herbicide is a member of the pyridines group of herbicides. The product has the disrupters of plant cell growth mode of action. For weed resistance management the product is a Group I Herbicide. Some naturally occurring weed biotypes resistant to the product and other disrupters of plant cell growth herbicides may exist through normal genetic variability in
any weed population. The resistant individuals can eventually dominate the weed population if these herbicides are used repeatedly. These resistant weeds will not be controlled by this product or other Group I Herbicides.

Since the occurrence of resistant weeds is difficult to detect prior to use, Corteva Agriscience Australia Pty Ltd accepts no liability for any losses that may result from the failure of Access® Herbicide to control resistant weeds. Strategies to minimise the risk of herbicide resistance are available. Contact your farm chemical supplier, consultant, local Department of Agriculture, or
local Corteva Agriscience representative.

For selective control of a wide range of woody and noxious weeds in commercial and industrial areas, public lands, fence lines and pastures, by basal bark and cut stump applications as specified in the Directions for Use.


DIRECTIONS FOR USE ----------


RESTRAINTS:
• DO NOT add water to Access® Herbicide.
• DO NOT apply to weeds which may be stressed (not actively growing) due to prolonged periods of extreme cold, moisture stress (water-logged or drought affected), poor
nutrition, presence of disease, or previous herbicide treatment as reduced levels of control may result.
• DO NOT apply to charcoal coated or wet stems as this can repel the diesel mixture.

See GENERAL INSTRUCTIONS - APPLICATION section for application method details.

WITHHOLDING PERIOD:
The use pattern of this product is such that no withholding periods are required.


GENERAL INSTRUCTIONS ----------

MIXING:
Access® herbicide is designed for use with diesel distillate only. It will NOT mix with water. Quarter fill the spray unit or mixing container with diesel and add the required amount of Access®. Add the remaining diesel and shake or agitate thoroughly to mix the contents. Only
mix sufficient chemical for each day's work, mixing periodically.

Please refer to the label for the Dilution Table.


GENERAL APPLICATION ----------

• Apply only with hand-directed equipment such as a pneumatic sprayer. The use of diesel as a herbicide carrier may affect the rubber seals in some sprayers. To avoid this, use sprayers, which use Viton seals and fittings.
• Spray equipment should be used at low pressures, up to 200 kPa, to avoid splashing.
• Ensure all stems on multi-stemmed varieties are treated. Delay treatment until all regrowth on bulldozed or ploughed land has had time to emerge to a height of at least 1 metre.
• Species that lose their leaves e.g. sweet briar; or become dormant, e.g. Australian blackthorn or camphor laurel, should not be treated during winter.
• Species with old, rough bark require more thorough wetting than the smooth barked species.
• DO NOT apply to charcoal coated or wet stems as this can repel the diesel mixture.

Basal Bark Application Method

• Dilute the indicated volume of Access® Herbicide with an appropriate carrier up to a total volume of 60 L. Liberally spray the bark around the stem from ground level to 30 cm high, wetting thoroughly to the point of runoff (unless otherwise stated).
• Access® ThinLine basal bark application method:
Alternatively, the application band can be reduced to 5 cm high but with the concentration increased proportionally (one part Access® diluted with 9 parts diesel) for the treatment ofthe smooth stemmed woody weed species: Acacia spp. (excluding Mimosa bush),
Cockspur thorn, Corymbia spp., Leucaena and Parkinsonia, also indicated with asterisks in the Directions for Use tables.

Cut Stump Method

• Stems should be cut less than 15 cm above ground level.
• Immediately apply Access®/carrier mixture liberally to the freshly cut stump by spraying the cut surface and sides of the stem.


CLEANING SPRAY EQUIPMENT ----------

Rinse water should be discharged onto a designated disposal area or, if this is unavailable, onto unused land away from desirable plants and watercourses.

• After completion of spraying, use a degreaser such as Caltex Kwik-D-Grease to remove traces of the carrier from the sprayer. Rinse tank and spray through nozzles thoroughly with water to remove degreaser.
After the above, quarter fill the tank with clean water and add a alkali detergent, (e.g. liquid SURF, OMO, DRIVE at 500 mL/100L of water or the powder equivalent at 500 g/100L of water). If using a concentrated laundry detergent use 250 g (or mL)/100 L water. Do not use chlorine based cleaners.
• Shake the water around the sprayer and spray the solution through the nozzles to thoroughly clean the lines and nozzles. Rinse well with clean water to remove detergent.
• To clean brushes and container, spray liberally with degreaser. Hose off thoroughly with water and repeat using detergents (see above).
• DO NOT use this equipment for any other purpose.


PROTECTION OF LIVESTOCK, WILDLIFE, FISH, CRUSTACEANS AND ENVIRONMENT ----------

• DO NOT contaminate streams, rivers or waterways with the chemical or used containers.
• Alongside waterways treat only noxious weeds and poisonous plants.


PROTECTION OF CROPS, NATIVE AND OTHER NON-TARGET PLANTS ----------

• Treat target weeds only. DO NOT allow mixture to contact non-target species.
• DO NOT use on land to be cultivated for growing sensitive plants. Legumes, vines, vegetables, cotton, tomatoes, ornamentals, coniferous species and many other broadleaf plants are highly susceptible to Access® during both growing and dormant periods.
• Picloram, one of the active ingredients in this product, can remain active in the soil for extended periods depending on soil type, rainfall, temperature, humidity, soil moisture and Soil organic matter.
• DO NOT move soil, which has been sprayed, to areas where desirable plants are to be grown.
• DO NOT apply when the treated soil may be washed to areas growing, or to be planted with desirable plants.
• DO NOT apply close to, or on, areas containing roots of desirable plants, or sites where surface water from heavy rain can be expected to run off to areas containing, or to be planted to, susceptible crops or plants.


FOR NATIVE VEGETATION ----------

Use of Access® on native vegetation must be done in accordance with STATE and/or LOCAL legislation.


SPILL AND LEAK MANAGEMENT ----------

Do not touch or walk through spilled material. Wear a face shield or goggles, overalls buttoned to neck and wrist, chemical resistant gloves and footwear. Stop leak when safe to do so. Dam area and prevent entry into waterways, and drains. Small spills/leaks: Absorb with material such as sand, soil or sawdust. Collect spilled product and place in sealable container for disposal. Spill residues may be cleaned using water and detergent. Contain and absorb wash water for disposal. Absorb and collect washings and place in the same sealable container for disposal. Dam the area of large spills and report them to Corteva Agriscience Emergency Services at 1-800 370 754.

APVMA Approval No. : 46640/102551

• Label File
• SDS File

Greenway Weed Solutions has a distribution centre in QLD only. All orders, Australia-wide will be shipped from this location.

Shipping is free on all online orders. Bulk purchase shipping rates are determined by total order weight and delivery location.

Pickups are available from the QLD warehouse. Updates to product availability in other Australian warehouses are upcoming.