Indigo Tank Aid 1L. Potassium hydroxide, Anti-corrosion compounds, Sequestering agents, Non-ionic and Ionic surfactants, Polydimethylsiloxane

Tank Aid can be used for cleaning of spraying equipment, for decontamination when changing from one agricultural chemical group to another and for end of season cleaning before storage.

Potassium hydroxide, Anti-corrosion compounds, Sequestering agents, Non-ionic and Ionic surfactants, Polydimethylsiloxane

RATE OF APPLICATION ----------

SITUATION:
1. Routine cleaning and decontamination of spray machinery
- Water volume: 200L
- Rate: 0.6-1.2L
- Comments: Use bypass or mechanical agitation to circulate solution throughout spray system. Use hose or hand boom to ensure solution will contact all contaminated surfaces of sprayer not submerged in the solution. Maintain solution contact for at least 15 minutes. When tank is cleaned, flush the cleaning solution through pump, all hoses, valves and nozzles.

2. Removal of residues of sulfonyl urea or phenoxy based herbicides
- Water volume: 100L
- Rate: 945mL
- Comments: Maintain solution contact for at least one hour.

3. Removal of stubborn stains on sprayer tanks and other machinery
- Water volume: 10L
- Rate: 90mL
- Comments: To remove stubborn spray stains on the outside of the tank, on tractors or other machinery. Mix TANK AID in a bucket and using rubber gloves, vigorously scrub the affected areas with the solution, using a stiff scrubbing brush.

4. For Backpack or Hand held sprayers
- Water volume: 10L
- Rate: 80-120mL
- Comments: Use higher rate for highly active herbicides as noted above. Agitate solution to ensure contact with all internal surfaces then spray through the hand wand for 1 to 2 minutes. Repeat with clear water.

RATE OF APPLICATION ----------

SITUATION:
1. Routine cleaning and decontamination of spray machinery
- Water volume: 200L
- Rate: 0.6-1.2L
- Comments: Use bypass or mechanical agitation to circulate solution throughout spray system. Use hose or hand boom to ensure solution will contact all contaminated surfaces of sprayer not submerged in the solution. Maintain solution contact for at least 15 minutes. When tank is cleaned, flush the cleaning solution through pump, all hoses, valves and nozzles.

2. Removal of residues of sulfonyl urea or phenoxy based herbicides
- Water volume: 100L
- Rate: 945mL
- Comments: Maintain solution contact for at least one hour.

3. Removal of stubborn stains on sprayer tanks and other machinery
- Water volume: 10L
- Rate: 90mL
- Comments: To remove stubborn spray stains on the outside of the tank, on tractors or other machinery. Mix TANK AID in a bucket and using rubber gloves, vigorously scrub the affected areas with the solution, using a stiff scrubbing brush.

4. For Backpack or Hand held sprayers
- Water volume: 10L
- Rate: 80-120mL
- Comments: Use higher rate for highly active herbicides as noted above. Agitate solution to ensure contact with all internal surfaces then spray through the hand wand for 1 to 2 minutes. Repeat with clear water.


FIRST AID:
Have the product container or label with you when calling a poison information centre (Australia: 13 11 26) or doctor or going for treatment. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical attention. IF ON SKIN: Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. If inhaled: Remove person to fresh air and keep comfortable for breathing.

STORAGE & DISPOSAL:
Do not contaminate water, food or feed by storage or disposal. Keep out of reach of children. Store locked up. Dispose of contents/container in accordance with local regulations.

NOTICE:
This product is designed only for the particular purposes indicated on the label. Failure to use the product strictly as directed may be illegal, prove dangerous and render the product ineffective. The buyer or user is responsible for any misuse or negligence in the handling, storage, use of or disposal of this material. Indigo Specialty Products Pty Ltd will not accept any responsibility whatsoever and howsoever arising and whether for consequential loss or otherwise in connection with the supply and use of this product other than those responsibilities mandatorily imposed by the Statutes applicable to the sale and supply of these goods.

• Label File
• SDS File
• Additional Information

Greenway Weed Solutions has a distribution centre in QLD only. All orders, Australia-wide will be shipped from this location.

Shipping is free on all online orders. Bulk purchase shipping rates are determined by total order weight and delivery location.

Pickups are available from the QLD warehouse. Updates to product availability in other Australian warehouses are upcoming.