Indigo Cambium Biodegradable Carrier for Woody Weeds 200L. Methyl Oleate (Canola Oil Methyl Ester)
P.O.A
Biodegradable Diesel Replacement
Cambium is a biodegradable diesel replacement for use in combination with woody weed herbicide technology when conducting Basal Bark and Cut Stump operations. The active ingredient in Cambium is Methyl Oleate (Canola Oil Methyl Ester), a lowly toxic, naturally derived solvent and carrier which assists herbicides to penetrate woody weeds more effectively. When used as per label directions, Cambium poses a much lower hazard for the user and the environment when compared to traditional diesel options.
Key Features:
- Highly effective solvency properties, making it compatible with a range of woody weed registered herbicide formulations.
- Ideal for use in environmentally sensitive areas. Biodegradable, minimising impact on the environment.
- Improves herbicide control achieved in Basal Bark and Cut Stump operations.
- Naturally derived material, containing no petroleum or mineral oil-based hydrocarbon solvents.
- Non DG (Dangerous Good) making transport and storage more efficient and less troublesome.
Active Ingredients
Methyl Oleate (Canola Oil Methyl Ester)
Label, SDS & Tech sheet
Application Information
Refer to the label for the complete Directions for Use.
HERBICIDE MIXES / APPLICATION METHODS / RATIOS ----------
1. Access Herbicide, Quake or Equivalent Herbicide
Application Method: Basal Bard or Cut Stump
Rate: 1-4L Herbicide to 60L of Cambium
2. Fluroxypyr 333g/L
Application Method: Basal Bard or Cut Stump
Rate: 0.9-3L Herbicide to 100L of Cambium
3. Fluroxypyr 400g/L
Application Method: Basal Bard or Cut Stump
Rate: 0.75-2.5L Herbicide to 100L of Cambium
4. Triclopyr 600g/L
Application Method: Basal Bard or Cut Stump
Rate: 0.5-5L Herbicide to 60L of Cambium
BASAL BARK ----------
Liberally spray or paint the bark around the stem from ground level up to 30cm high, wetting thoroughly to the point of run-off (unless otherwise stated). Cut Stump: Apply mixture liberally to the freshly cut stump by spraying or painting the cut surface and sides of the stem (unless otherwise stated).
MIXING INSTRUCTIONS ----------
Quarter fill the spray unit or mixing container with Cambium and add the required amount of herbicide. Add the remaining Cambium and shake or agitate thoroughly to mix the contents. Only mix sufficient chemical for each day’s work, mixing periodically.
Product Label Summary
DIRECTIONS FOR USE ----------
HERBICIDE MIXES / APPLICATION METHODS / RATIOS ----------
1. Access Herbicide, Quake or Equivalent Herbicide
Application Method: Basal Bard or Cut Stump
Rate: 1-4L Herbicide to 60L of Cambium
2. Fluroxypyr 333g/L
Application Method: Basal Bard or Cut Stump
Rate: 0.9-3L Herbicide to 100L of Cambium
3. Fluroxypyr 400g/L
Application Method: Basal Bard or Cut Stump
Rate: 0.75-2.5L Herbicide to 100L of Cambium
4. Triclopyr 600g/L
Application Method: Basal Bard or Cut Stump
Rate: 0.5-5L Herbicide to 60L of Cambium
BASAL BARK ----------
Liberally spray or paint the bark around the stem from ground level up to 30cm high, wetting thoroughly to the point of run-off (unless otherwise stated). Cut Stump: Apply mixture liberally to the freshly cut stump by spraying or painting the cut surface and sides of the stem (unless otherwise stated).
MIXING INSTRUCTIONS ----------
Quarter fill the spray unit or mixing container with Cambium and add the required amount of herbicide. Add the remaining Cambium and shake or agitate thoroughly to mix the contents. Only mix sufficient chemical for each day’s work, mixing periodically.
STORAGE AND DISPOSAL ----------
Store in original sealed container away from direct sunlight. Dispose of contents and container according to local regulations.
SAFETY AND FIRST AID ----------
Cambium is non-hazardous but should always be handled with good agrichemical handling practices. When using with other products consult their safety directions. Avoid repeated or prolonged skin contact. Wear overalls, impervious gloves and chemical goggles. Use adequate ventilation. Avoid breathing product vapours or mists. If skin contact occurs, remove contaminated clothing and wash skin thoroughly. If in eyes do not rub. Hold eyes open, flood with water for at least 15 minutes and see a doctor. If swallowed, DO NOT induce vomiting. Give a glass of water. Contact a doctor Additional information is listed in the Safety Data Sheet (SDS), which can be obtained from the supplier.
Choose options